Compare cutting methods, wire selection and process parameters for hard and brittle materials.
Servo motor performance is decided before the motor is assembled. The magnetic field uniformity that determines torque ripple, positioning accuracy, and speed stability comes directly from how consistently the NdFeB
For VCM and encoder magnets, thin NdFeB slice 0.3mm cutting is not just “making the magnet thinner.” At 0.3-1.0 mm thickness, a small change in wire tension, coolant flow, or
For NdFeB magnet producers, the decision between an inner diameter (ID) saw and a multi-wire saw is no longer a debate about which cuts cleaner — both can produce acceptable
NdFeB cutting kerf loss reduction is the process of minimizing the material removed as sawdust during magnet slicing — directly converting wasted rare earth material into additional finished magnets from
Magnet production line equipment is the integrated set of slicing, grinding, lapping, and polishing machines that converts raw sintered NdFeB blocks into finished magnet components ready for assembly. Instead of
Electric motors consume more permanent magnets than any other application. From industrial servo drives to household appliances, from power tool motors to HVAC compressors — every brushless DC or permanent
Magnet cutting & machining NdFeB Cutting Machine From sintered blocks to straight slices and arc magnet segments. Compare the SOM-220D and SOM4-750D by part geometry, workpiece size and the finishing
Direct-drive wind turbines use permanent magnet generators instead of gearboxes. Each generator contains 600–2,000 kg of NdFeB magnets — arranged as dozens of large arc-shaped segments bolted around the rotor.
The global EV market is expected to reach 40 million vehicles per year by 2030. Every one of those vehicles contains 2–5 kg of NdFeB permanent magnets in its traction
Germanium wafers are essential substrates for infrared detectors, thermographic sensors, and optical components. However, Ge is a brittle semiconductor crystal prone to edge chipping and surface damage during cutting. Traditional