Large Scale Multi Wire Saw SOM4-1000D
The SOM4-1000D large scale multi wire saw uses a four-axis, dual-board tangential cutting arrangement for long blanks and squaring work. Its listed capacity is 1000 × 200 × 150 mm at each of two positions, with a 1.5–25 mm slice range. Select the machine against the full blank geometry, mounting method and required cutting result.
How does a large scale multi wire saw fit the production route?
Prepare and mount the blank, cut or square it, inspect the separated pieces, then carry out the required downstream finishing. The listed slice thickness is an as-cut machine range, not a finished-part tolerance or surface-quality guarantee.
Check the complete 1000 × 200 × 150 mm envelope, together with the fixture and support arrangement.
Agree the as-cut thickness and finishing allowance. Other SOM machines serve different thickness and cross-section requirements.
Two positions provide a dual-board loading arrangement. Actual output depends on material, setup, cutting and handling time.
Technical Specifications
| No. | Parameter | Specification | Notes |
|---|---|---|---|
| 1 | Maximum Workpiece Size | 1000 × 200 × 150 mm × 2 | Listed capacity per position: 1000 × 200 × 150 mm |
| 2 | Slice Thickness Range | 1.5–25 mm | Not a finished-part tolerance |
| 3 | Grooved Roller Diameter | 140–160 mm | Listed roller range |
| 4 | Main-Unit Power | 85 kW | Source specification; final connected load to be confirmed |
| 5 | Average Power Consumption | ≤30 kW (source-listed) | Test conditions are not stated; not a guaranteed operating consumption |
| 6 | Overall Dimensions (L×W×H) | 2900 × 2300 × 2600 mm | Allow additional loading and service clearance |
| 7 | Workpiece Positions | 2 (dual-board) | Review the mounting arrangement |
| 8 | Cutting Arrangement | Four-axis tangential cutting | Standard downward feed |
| 9 | Material Suitability | Confirm by material grade and trial | No blanket material-specific cutting guarantee |
| 10 | Certification | CE certified | Order-specific documentation to be confirmed |
Wire diameter, wire speed, feed, tension, weight and cutting tolerances are not given in the current model specification. Confirm them for the ordered configuration rather than borrowing data from another machine.
When should you evaluate SOM4-1000D?
Long workpieces
Consider SOM4-1000D for long blanks within its listed envelope. Include the fixture, supports and loading access in the review. A 1000 mm length alone does not confirm fit.
Squaring and repeated straight slices
Provide the incoming blank and the required cut drawing. Confirm slice thickness and downstream allowance, rather than assuming every material uses the same process.
Comparing a production route
Evaluate a representative trial with cutting, handling and inspection time. No fixed machine-replacement ratio, labor saving or cost reduction is promised.
Planning a new installation
Discuss final machine configuration, utilities, access and service space. Site surveys, installation scope and delivery timing are confirmed with the order.
SOM400, SOM4-630D or SOM4-1000D?
Compare workpiece length and cross-section before evaluating cycle time. SOM400 addresses a larger cross-section; SOM4-630D provides a shorter dual-workstation arrangement; SOM4-1000D is the long-blank option. Their dimensions alone do not establish a production-rate ratio.
| Selection factor | SOM400 | SOM4-630D | SOM4-1000D |
|---|---|---|---|
| Workpiece geometry | 400 × 400 × 830 mm listed envelope; two adjacent work plates | 630 mm listed blank length; dual workstations | 1000 × 200 × 150 mm per position × 2 |
| Selection focus | Larger 400 × 400 mm cross-section | Shorter blanks and squaring requirements | Long blanks within a 200 × 150 mm cross-section |
| Listed slice thickness | 1–35 mm | Confirm the current order specification | 1.5–25 mm |
| Product details | View SOM400 | View SOM4-630D | Current model |
The SOM4-630D source materials contain unresolved parameter differences, so its disputed slice range and power are not repeated here. See the multi-wire saw model guide for other configurations. Material, workholding and the required result must be reviewed for each model.
Dual-board cutting and main assemblies
Concept illustration only: not a dimensional machine drawing or actual wire-routing diagram. Two workpiece positions do not establish twice the accepted output.
Grooved rollers
The guide system establishes the parallel wire spans. The listed roller diameter is 140–160 mm; final groove pitch and wire selection must suit the requested cut.
Dual work plates
The two positions hold supported blanks for the cutting setup. Review fixture access and handling before deciding how to use the full listed envelope.
Tangential feed
The workpiece is fed through the cutting web using the standard feed arrangement. The diagram shows the concept, not the actual roller routing or independent control capabilities.
Installation and support
Electrical supply, cooling, compressed air, foundation and service requirements are confirmed with your order. CE certified, 12-month warranty, response within 12 hours and free sample cutting are the confirmed support terms.
Frequently Asked Questions
What site preparation is required?
The listed machine dimensions are 2900 × 2300 × 2600 mm. Obtain the final installation drawing and confirm loading, service access, utilities and foundation requirements with the order. The listed 85 kW main-unit power is not a complete electrical installation design.
Can one machine replace two smaller machines?
That cannot be inferred from workpiece length or the number of boards. Compare accepted output using the actual material, cut, loading, unloading and inspection cycle before making a capacity decision.
Is 25 mm the thickest slice in the SOM series?
No. SOM4-1000D lists 1.5–25 mm; SOM400 lists 1–35 mm and serves a different workpiece cross-section. Select against the complete geometry and cutting requirement.
What are the delivery and installation terms?
Delivery timing, installation scope, training and any site-survey arrangements are confirmed with your order. This page does not promise a standard lead time or included on-site services.
Which material and sample details should I provide?
Send the material grade, complete blank dimensions, fixture concept, target slice thickness and acceptance criteria. Free sample cutting can be discussed for a representative workpiece; no general material-specific yield or tolerance is guaranteed.
Related SOM Models
For thinner hard-material slices, review SOMS3-430. For downstream processing, see grinding and lapping equipment.
Share the material grade, full blank dimensions, target thickness and inspection criteria to discuss the cutting configuration and a representative trial. CE certified · 12-month warranty · 12-hour response · Free sample cutting.
Email: daria@endlesswiresaw.com | Tel: +86 130 2773 8908