{"id":4917,"date":"2026-04-08T16:41:24","date_gmt":"2026-04-08T08:41:24","guid":{"rendered":"https:\/\/www.semiconductorcutting.com\/product\/single-wire-saw-som2-600s\/"},"modified":"2026-10-28T00:06:10","modified_gmt":"2026-10-28T04:06:10","slug":"ultra-thin-wafer-slicing-wire-saw","status":"publish","type":"product","link":"https:\/\/www.semiconductorcutting.com\/ko\/product\/ultra-thin-wafer-slicing-wire-saw\/","title":{"rendered":"\ucd08\ubc15\ud615 \uc6e8\uc774\ud37c \uc2ac\ub77c\uc774\uc2f1 \uba38\uc2e0 SOMI2-600S"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-post\" data-elementor-id=\"4917\" class=\"elementor elementor-4917\" data-elementor-post-type=\"product\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600c00 e-con-full e-flex e-con e-parent\" data-id=\"i600c00\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w00 elementor-widget elementor-widget-html\" data-id=\"i600w00\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<style>.scp{--white:#fff;--bg:#F3F8F6;--bg-2:#D8EDE5;--ink:#1F2A26;--ink-soft:#4F5F59;\n  --green:#2E8B68;--green-dark:#257259;--green-deep:#1A4032;--green-tint:#E6F3EE;\n  --line:#DDE8E3;--line-2:#B9D8CB;--lime:#93CA12;--amber:#B7791F;--amber-bg:#FBF3E4;\n  --disp:'Josefin Sans',sans-serif;--sans:'Lato',sans-serif;--mono:'IBM Plex Mono',monospace;\n  background:var(--white);color:var(--ink);font-family:var(--sans);font-size:17px;line-height:1.65}\n.scp *{box-sizing:border-box;margin:0;padding:0}\n.scp .wrap{max-width:1160px;margin:0 auto;padding:0 24px}\n.scp a{color:var(--green-dark);text-underline-offset:3px}\n.scp h1{font-family:var(--disp);font-weight:700;font-size:clamp(30px,4.2vw,46px);line-height:1.1;margin-bottom:16px}\n.scp h2{font-family:var(--disp);font-weight:700;font-size:clamp(24px,3vw,32px);line-height:1.18;margin-bottom:10px}\n.scp h3{font-family:var(--disp);font-weight:600;font-size:19px;margin-bottom:6px}\n.scp p{margin-bottom:14px;max-width:70ch}\n.scp section{padding:58px 0}\n.scp .band{background:var(--bg)}\n.scp .kicker{font-family:var(--mono);font-size:12px;font-weight:600;letter-spacing:.14em;text-transform:uppercase;color:var(--green);margin-bottom:12px;display:block}\n.scp .model{font-family:var(--mono);font-size:13px;color:var(--green-deep);margin-bottom:10px}\n.scp .hero{padding:54px 0;background:linear-gradient(180deg,var(--bg) 0%,var(--white) 100%)}\n.scp .hero .wrap{display:grid;grid-template-columns:1fr 1fr;gap:40px;align-items:center}\n.scp .lede{font-size:18px;color:var(--ink-soft);margin-bottom:22px}\n.scp .stats{display:grid;grid-template-columns:repeat(4,1fr);gap:10px;margin-bottom:24px}\n.scp .stat{border-top:3px solid var(--green);background:var(--white);padding:10px 12px}\n.scp .stat .v{font-family:var(--disp);font-weight:700;font-size:21px;color:var(--green-deep)}\n.scp .stat .l{font-family:var(--mono);font-size:10.5px;text-transform:uppercase;color:var(--ink-soft)}\n.scp .btn{display:inline-block;background:var(--green);color:#fff;font-weight:700;padding:11px 20px;border-radius:4px;text-decoration:none;margin-right:10px}\n.scp .btn:hover{background:var(--green-dark);color:#fff}\n.scp .btn.alt{background:transparent;color:var(--green-dark);border:1.5px solid var(--line-2)}\n.scp .grid2{display:grid;grid-template-columns:1fr 1fr;gap:22px}\n.scp .card{border:1px solid var(--line);border-left:4px solid var(--green);padding:20px;background:var(--white)}\n.scp .flow{display:flex;gap:8px;flex-wrap:wrap;margin:10px 0}\n.scp .flow .s{flex:1;min-width:120px;border:1px solid var(--line);padding:12px;text-align:center;font-size:14px}\n.scp .flow .s.on{background:var(--green-tint);border-color:var(--green);font-weight:700}\n.scp .tw{overflow-x:auto}\n.scp table{width:100%;border-collapse:collapse;font-size:15px;min-width:460px}\n.scp th,.scp td{text-align:left;padding:10px 14px;border-bottom:1px solid var(--line)}\n.scp thead th{background:var(--green-deep);color:#EAF6F0;font-family:var(--mono);font-size:11px;text-transform:uppercase;letter-spacing:.05em}\n.scp tbody tr:nth-child(even){background:var(--bg)}\n.scp .spec td:first-child{color:var(--ink-soft);width:45%}\n.scp .spec td:last-child{font-family:var(--mono);font-weight:600}\n.scp .note{background:var(--green-tint);border-left:4px solid var(--green);padding:14px 18px;margin:16px 0}\n.scp .note.warn{background:var(--amber-bg);border-left-color:var(--amber)}\n.scp figure{margin:0}\n.scp .photo{border:1px solid var(--line);background:var(--bg-2)}\n.scp .photo img{display:block;width:100%;height:auto}\n.scp .photo figcaption{font-family:var(--mono);font-size:11px;color:var(--ink-soft);padding:8px 12px;background:var(--white)}\n.scp .vids{display:grid;grid-template-columns:1fr 1fr;gap:20px}\n.scp .video{position:relative;aspect-ratio:16\/9;background:#000}\n.scp .video iframe{position:absolute;inset:0;width:100%;height:100%;border:0}\n.scp .cta{background:var(--green-deep);color:#EAF6F0}\n.scp .cta h2{color:#fff}\n.scp .cta .btn{background:var(--lime);color:var(--green-deep)}\n.scp svg.diagram{width:100%;height:auto;display:block}\n.scp svg.diagram text{font-family:var(--mono);font-size:12px;fill:var(--ink)}\n@media(max-width:860px){.scp .hero .wrap,.scp .grid2,.scp .vids{grid-template-columns:1fr}.scp .stats{grid-template-columns:repeat(2,1fr)}}\n\n.scp.somi600-product .hero{padding:80px 0 40px}.scp.somi600-product .photo{background:#fff}.scp.somi600-product .hero img{height:340px;object-fit:contain}.scp.somi600-product ul{padding-left:22px;margin:14px 0}.scp.somi600-product li{margin-bottom:8px}.scp.somi600-product .diagram-panel{background:#fff;border:1px solid var(--line);padding:22px;margin:22px 0}.scp.somi600-product .list{padding-left:22px}.scp.somi600-product details{padding:18px 0;border-bottom:1px solid var(--line)}.scp.somi600-product summary{font-size:20px;font-weight:700;cursor:pointer}.scp.somi600-product details p{margin-top:14px}.scp.somi600-product .cta{background:#1A4032;color:#EAF6F0}.scp.somi600-product .cta h2{color:#fff}.scp.somi600-product .cta .btn{background:#93CA12;color:#1A4032}.scp.somi600-product .trust{font-size:14px;margin-top:20px}@media(max-width:767px){.scp.somi600-product .hero{padding:34px 0}.scp.somi600-product .hero img{height:260px}}\n<\/style><div class=\"scp somi600-product\"><section class=\"hero\"><div class=\"wrap\"><div><p class=\"model\">Vimfun SOMI2-600S \u00b7 Two-axis inverted cutting<\/p><h1>Ultra Thin Wafer Slicing Machine SOMI2-600S<\/h1><p class=\"lede\">An ultra thin wafer slicing machine for longer blanks and high-speed reciprocating wire operation. A two-axis, single-workstation inverted arrangement supports parallel slicing within a 660 \u00d7 160 \u00d7 150 mm workpiece envelope.<\/p><div class=\"stats\"><div class=\"stat\"><div class=\"v\">660 mm<\/div><div class=\"l\">Max. blank length<\/div><\/div><div class=\"stat\"><div class=\"v\">0.3\u20133 mm<\/div><div class=\"l\">Listed slice range<\/div><\/div><div class=\"stat\"><div class=\"v\">2,200<\/div><div class=\"l\">Max. wire speed, m\/min<\/div><\/div><div class=\"stat\"><div class=\"v\">1 station<\/div><div class=\"l\">Inverted cutting<\/div><\/div><\/div><a class=\"btn\" href=\"https:\/\/www.semiconductorcutting.com\/cut-equipment-manufacturer\/\">Request free sample cutting<\/a><a class=\"btn alt\" href=\"#specifications\">View specifications<\/a><\/div><figure class=\"photo\"><img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/04\/SOM2-600S-Multiwire-saw.webp\" width=\"800\" height=\"800\" alt=\"Ultra thin wafer slicing machine SOMI2-600S equipment view\" fetchpriority=\"high\"><figcaption>SOMI2-600S equipment view. Workholding and ordered configuration require review.<\/figcaption><\/figure><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c01 e-con-full e-flex e-con e-parent\" data-id=\"i600c01\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w01 elementor-widget elementor-widget-html\" data-id=\"i600w01\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section id=\"process\"><div class=\"wrap\"><h2>Where does SOMI2-600S fit in wafer preparation?<\/h2><p>The machine sits at the slicing stage between prepared ingot handling and downstream finishing. The incoming blank must fit the usable workpiece envelope after allowing for its mounting and support. The output is an as-cut slice; grinding, lapping or polishing may still be needed to reach the finished substrate requirement.<\/p><div class=\"flow\"><div class=\"s\">Prepare the blank<\/div><div class=\"s\">Mount &amp; align<\/div><div class=\"s on\">Inverted slicing<\/div><div class=\"s\">Inspect slices<\/div><div class=\"s\">Finish surfaces<\/div><\/div><p>The listed 0.3\u20133 mm range describes slice thickness, not thickness tolerance, total thickness variation or a universal finished-wafer specification. Agree on the target as-cut thickness and finishing allowance before choosing the setup. The <a href=\"https:\/\/www.semiconductorcutting.com\/grinding-lapping-machine\/\">grinding and lapping equipment overview<\/a> covers the next equipment stage.<\/p><p>Start with this model when a longer blank or the listed higher wire-speed capability matters to the process review. For blanks within 430 mm length, compare <a href=\"https:\/\/www.semiconductorcutting.com\/product\/inverted-multi-wire-saw-somi-430\/\">SOMI-430<\/a> before moving to the larger envelope. Neither machine's maximum speed establishes the production feed rate or accepted output per hour.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c02 e-con-full e-flex e-con e-parent\" data-id=\"i600c02\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w02 elementor-widget elementor-widget-html\" data-id=\"i600w02\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section class=\"band\" id=\"principle\"><div class=\"wrap\"><h2>How does the inverted wire web cut a longer blank?<\/h2><p>Inverted cutting feeds the supported workpiece upward into the wire web. Parallel wire spans create multiple slices during the cut, while the wire travels reciprocally through the guide system. The source identifies two axes and one workstation, rather than the dual-workstation arrangement of other SOM models.<\/p><div class=\"diagram-panel\"><svg class=\"diagram\" viewBox=\"0 0 880 310\" role=\"img\" aria-label=\"Concept comparison of inverted upward feed and standard downward feed\"><title>Inverted and standard feed concepts<\/title><rect width=\"880\" height=\"310\" fill=\"#f3f8f6\"\/><text x=\"65\" y=\"30\">SOMI2-600S: INVERTED FEED<\/text><text x=\"515\" y=\"30\">STANDARD FEED CONCEPT<\/text><g stroke=\"#257259\" stroke-width=\"3\"><path d=\"M60 115H380M60 125H380M60 135H380M500 195H820M500 205H820M500 215H820\"\/><rect x=\"140\" y=\"200\" width=\"160\" height=\"60\" fill=\"#d8ede5\"\/><rect x=\"580\" y=\"65\" width=\"160\" height=\"60\" fill=\"#d8ede5\"\/><path d=\"M220 193V150M209 162L220 150L231 162M660 135V177M649 165L660 177L671 165\" fill=\"none\"\/><\/g><text x=\"160\" y=\"237\">Workpiece<\/text><text x=\"600\" y=\"102\">Workpiece<\/text><text x=\"90\" y=\"290\">Workpiece feeds upward<\/text><text x=\"545\" y=\"290\">Workpiece feeds downward<\/text><text x=\"72\" y=\"90\">Parallel wire spans<\/text><text x=\"510\" y=\"245\">Parallel wire spans<\/text><\/svg><p class=\"trust\">Concept illustration only. It compares feed directions and does not show the actual machine's wire routing, dimensions or control sequence.<\/p><\/div><p>The grooved rollers establish wire spacing. Nominal slice thickness depends on the selected groove pitch and the effective cutting kerf; wire diameter alone is not a complete kerf specification. Roller pitch, wire selection and material conditions must be reviewed together for the requested thickness.<\/p><p>The source describes a smaller center distance in the single-plate arrangement. This is not evidence that slice spacing becomes smaller simply because cutting is inverted. The layout and the cutting recipe must be evaluated separately. No unsupported claim about subsurface damage or reduced polishing is used as a substitute for trial results.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-0d37458 e-con-full e-flex e-con e-parent\" data-id=\"0d37458\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-31cbb83 elementor-widget elementor-widget-html\" data-id=\"31cbb83\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<style>.cerapp#cer-difficulty{padding-bottom:28px}.vf-principle{border-top:1px solid #dce6e0;background:#fff;color:#173d32;padding:36px 24px;font:16px\/1.65 Lato,Arial,sans-serif;box-sizing:border-box}.vf-principle *{box-sizing:border-box}.vf-principle .vp-wrap{max-width:1160px;margin:0 auto}.vf-principle .vp-grid{display:grid;grid-template-columns:minmax(0,38fr) minmax(0,58fr);gap:40px;align-items:center}.vf-principle h2{font-family:'Josefin Sans',Lato,Arial,sans-serif;font-size:30px;font-weight:700;line-height:1.25;margin:0 0 18px;color:#173d32}.vf-principle .vp-intro{color:#52635d;margin:0 0 20px;max-width:44ch}.vf-principle .vp-steps{padding:0;margin:0;list-style:none;counter-reset:vp-step}.vf-principle .vp-steps li{counter-increment:vp-step;display:grid;grid-template-columns:38px 1fr;gap:14px;padding:15px 0;border-top:1px solid #dce6e0}.vf-principle .vp-steps li:before{content:counter(vp-step,decimal-leading-zero);font-size:16px;color:#267b5c;line-height:1.7}.vf-principle .vp-steps strong{font-size:16px;color:#173d32;display:block;margin:0 0 3px}.vf-principle .vp-steps p{margin:0;color:#5d6a65;font-size:14px;line-height:1.6}.vf-principle .vp-player{width:100%;aspect-ratio:16\/9;position:relative;background:#173d32;border-radius:8px;overflow:hidden}.vf-principle .vp-launch{padding:0;border:0;width:100%;height:100%;display:block;position:absolute;inset:0;cursor:pointer;background:#173d32}.vf-principle .vp-launch img{width:100%;height:100%;object-fit:cover;display:block}.vf-principle .vp-play{position:absolute;left:50%;top:50%;transform:translate(-50%,-50%);background:#c90000;color:white;padding:12px 22px;border-radius:7px;font:700 15px\/1.2 Lato,Arial,sans-serif}.vf-principle .vp-player [hidden]{display:none!important}.vf-principle iframe{position:absolute;inset:0;width:100%;height:100%;border:0}.vf-principle figure{margin:0;min-width:0}.vf-principle figcaption{font-size:12px;line-height:1.6;color:#607069;margin:12px 0 0}.vf-principle .vp-more{margin-top:28px;border-top:1px solid #dce6e0;padding-top:14px;color:#52635d}.vf-principle summary{cursor:pointer;font-size:14px;color:#276e54}.vf-principle .vp-original{padding-top:18px}.vf-principle .vp-original figure{margin:16px 0}.vf-principle .vp-original svg{width:100%;max-width:900px;height:auto}.vf-principle .vp-original a{color:#287b5d}@media(max-width:767px){.vf-principle{padding:32px 20px}.vf-principle .vp-grid{grid-template-columns:1fr;gap:24px}.vf-principle h2{font-size:27px;line-height:1.25}.vf-principle .vp-intro{max-width:none}.vf-principle .vp-steps li{padding:11px 0;grid-template-columns:30px 1fr;gap:10px}.vf-principle figcaption{font-size:12px}}<\/style><section class=\"vf-principle\" id=\"multiwire-principle-video\"><div class=\"vp-wrap\" style=\"max-width:1160px\"><div class=\"vp-grid\"><div><h2>See How the Multi-Wire Cutting Principle Works<\/h2><p class=\"vp-intro\">A moving diamond wire web makes parallel cuts through the workpiece. Watch the principle before comparing the machine configuration.<\/p><ol class=\"vp-steps\"><li><div><strong>Wire web<\/strong><p>Guide rollers position the parallel diamond wire paths.<\/p><\/div><\/li><li><div><strong>Workpiece feed<\/strong><p>The supported workpiece feeds into the moving wire web.<\/p><\/div><\/li><li><div><strong>Parallel slices<\/strong><p>Several cuts separate the block into slices in one cycle.<\/p><\/div><\/li><\/ol><\/div><figure><div class=\"vp-player\"><button type=\"button\" class=\"vp-launch\" aria-label=\"Play multi-wire cutting principle video\" onclick=\"var f=this.nextElementSibling;f.src=f.dataset.src;f.hidden=false;this.hidden=true;\"><img decoding=\"async\" src=\"https:\/\/i.ytimg.com\/vi\/ykgWGvza8Vg\/maxresdefault.jpg\" alt=\"Multi-wire diamond saw working principle animation\" loading=\"lazy\"><span class=\"vp-play\">Play video<\/span><\/button><iframe hidden data-src=\"https:\/\/www.youtube-nocookie.com\/embed\/ykgWGvza8Vg?autoplay=1\" title=\"Vimfun Multi-Wire Diamond Saw \u2013 How It Works\" loading=\"lazy\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe><\/div><figcaption>Multi-wire cutting principle \u00b7 configuration varies by model. <a href=\"https:\/\/youtu.be\/ykgWGvza8Vg\" target=\"_blank\" rel=\"noopener\" style=\"color:inherit\">Watch on YouTube<\/a><\/figcaption><\/figure><\/div><\/div><\/section>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c03 e-con-full e-flex e-con e-parent\" data-id=\"i600c03\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w03 elementor-widget elementor-widget-html\" data-id=\"i600w03\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section id=\"capability\"><div class=\"wrap\"><h2>Selecting an ultra thin wafer slicing machine for your blank<\/h2><div class=\"grid2\"><div class=\"card\"><h3>Longer single-station loading<\/h3><p>The listed envelope is 660 \u00d7 160 \u00d7 150 mm. Check blank length and cross-section together, then account for fixtures, bonded supports and loading clearance. A matching blank length alone does not establish that the mounted assembly fits.<\/p><\/div><div class=\"card\"><h3>High-speed wire capability<\/h3><p>The listed maximum reciprocating wire speed is 2,200 m\/min. Treat it as an equipment limit. Feed, tension, coolant and the usable operating speed must be selected for the actual material and target surface condition.<\/p><\/div><\/div><p>A high speed multi wire saw should be compared on accepted slices after inspection, not maximum wire speed alone. Include preparation, loading, separation, inspection and changeovers when assessing a production route. Thin wafer multi wire saw selection also needs a practical handling plan for the separated slices.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c04 e-con-full e-flex e-con e-parent\" data-id=\"i600c04\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w04 elementor-widget elementor-widget-html\" data-id=\"i600w04\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section class=\"band\" id=\"specifications\"><div class=\"wrap\"><h2>Technical specifications<\/h2><div class=\"tw\"><table class=\"spec\"><thead><tr><th>Parameter<\/th><th>SOMI2-600S<\/th><\/tr><\/thead><tbody><tr><td>Maximum blank size<\/td><td>660 \u00d7 160 \u00d7 150 mm<\/td><\/tr><tr><td>Listed slice thickness<\/td><td>0.3\u20133 mm<\/td><\/tr><tr><td>Grooved roller diameter<\/td><td>160\u2013180 mm<\/td><\/tr><tr><td>Maximum reciprocating wire speed<\/td><td>2,200 m\/min<\/td><\/tr><tr><td>Overall machine dimensions<\/td><td>2,450 \u00d7 2,000 \u00d7 2,000 mm<\/td><\/tr><tr><td>Cutting arrangement<\/td><td>Two-axis, single-workstation inverted cutting<\/td><\/tr><\/tbody><\/table><\/div><p class=\"note\">Listed machine ranges do not guarantee a material-specific thickness tolerance, surface roughness or yield. Wire diameter, tension, feed range, machine power and weight require confirmation; values from other SOM machines are not substituted.<\/p><p>Installation dimensions describe the machine, not the full space required for loading, access and service. Confirm the final installation drawing before preparing the site. The minimum listed slice thickness must also be distinguished from the finished substrate thickness after material removal.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c05 e-con-full e-flex e-con e-parent\" data-id=\"i600c05\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w05 elementor-widget elementor-widget-html\" data-id=\"i600w05\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section id=\"materials\"><div class=\"wrap\"><h2>What material information is needed before a trial?<\/h2><p>For silicon projects, compare blank capacity, finishing allowance and acceptance checks in the <a href=\"https:\/\/www.semiconductorcutting.com\/semiconductor-wafer-manufacturing\/\">silicon ingot slicing application guide<\/a>. Confirm the setup and trial requirements for your workpiece.<\/p><p>This model is positioned for wafer and thin-slice preparation. Material suitability must be confirmed against the actual grade, crystal structure, geometry and required result. A generic list of semiconductor materials does not establish that one recipe or thickness tolerance applies to all of them.<\/p><div class=\"tw\"><table><thead><tr><th>Input<\/th><th>What to provide<\/th><th>Why it matters<\/th><\/tr><\/thead><tbody><tr><td>Material<\/td><td>Grade, composition and crystal orientation where relevant<\/td><td>Defines the trial material rather than relying on a broad family name<\/td><\/tr><tr><td>Incoming blank<\/td><td>Dimensions, shape, reference surfaces and mounting method<\/td><td>Checks the usable envelope and support arrangement<\/td><\/tr><tr><td>Required slice<\/td><td>As-cut thickness, finishing allowance and inspection criteria<\/td><td>Separates slicing requirements from final substrate acceptance<\/td><\/tr><\/tbody><\/table><\/div><p>No material-specific minimum thickness or guaranteed cutting yield is asserted here. Send the material information with the drawing so the team can review a representative trial rather than transferring an unrelated machine's result.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c06 e-con-full e-flex e-con e-parent\" data-id=\"i600c06\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w06 elementor-widget elementor-widget-html\" data-id=\"i600w06\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section class=\"band\" id=\"assemblies\"><div class=\"wrap\"><h2>Main assemblies and what they do<\/h2><div class=\"grid2\"><div class=\"card\"><h3>Grooved rollers and wire web<\/h3><p>The two-axis arrangement supports the parallel cutting spans. Groove geometry and wire selection must match the intended slice setup. The documented roller diameter range is 160\u2013180 mm; no unverified wire diameter is assigned to this model.<\/p><\/div><div class=\"card\"><h3>Single workstation<\/h3><p>The workstation supports one mounted cutting arrangement. Review the fixture, reference surfaces and access before deciding how the full blank envelope will be used. A single-station layout must not be described as a dual-plate machine.<\/p><\/div><div class=\"card\"><h3>Inverted feed arrangement<\/h3><p>The workpiece feeds upward into the web. Loading, support and slice handling should be considered together, using the actual workpiece and tooling. The simplified diagram explains direction rather than proving an automatic quality improvement.<\/p><\/div><div class=\"card\"><h3>Reciprocating wire movement<\/h3><p>Wire travel supplies cutting motion while workpiece feed controls engagement. The maximum travel speed and the actual production feed are separate parameters. Confirm operating settings through process review and sample cutting.<\/p><\/div><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c07 e-con-full e-flex e-con e-parent\" data-id=\"i600c07\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w07 elementor-widget elementor-widget-html\" data-id=\"i600w07\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section id=\"comparison\"><div class=\"wrap\"><h2>SOMI2-600S or SOMI-430: which fits your workpiece?<\/h2><p>Both use two-axis inverted cutting and list a 0.3\u20133 mm slice range. The main documented distinctions are blank length and maximum wire speed. Choose the required envelope first, then evaluate whether the extra speed capability is relevant to your tested process.<\/p><div class=\"tw\"><table><thead><tr><th>Selection factor<\/th><th>SOMI2-600S<\/th><th>SOMI-430<\/th><\/tr><\/thead><tbody><tr><td>Maximum blank size<\/td><td>660 \u00d7 160 \u00d7 150 mm<\/td><td>430 \u00d7 160 \u00d7 150 mm<\/td><\/tr><tr><td>Listed slice thickness<\/td><td>0.3\u20133 mm<\/td><td>0.3\u20133 mm<\/td><\/tr><tr><td>Maximum wire speed<\/td><td>2,200 m\/min<\/td><td>1,200 m\/min<\/td><\/tr><tr><td>When to evaluate<\/td><td>Longer blanks or higher wire-speed capability<\/td><td>Blanks within the shorter envelope<\/td><\/tr><\/tbody><\/table><\/div><p>See the <a href=\"https:\/\/www.semiconductorcutting.com\/product\/inverted-multi-wire-saw-somi-430\/\">SOMI-430 product details<\/a> for its full specifications. For laboratory-scale batches, review <a href=\"https:\/\/www.semiconductorcutting.com\/product\/small-multi-wire-saw-som200\/\">SOM200<\/a>. For other cutting arrangements, use the <a href=\"https:\/\/www.semiconductorcutting.com\/multi-wire-saw-machine\/\">multi-wire saw selection guide<\/a> rather than assuming this model covers every slice or workpiece size.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c08 e-con-full e-flex e-con e-parent\" data-id=\"i600c08\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w08 elementor-widget elementor-widget-html\" data-id=\"i600w08\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section class=\"band\" id=\"support\"><div class=\"wrap\"><h2>Installation, trial planning and support<\/h2><p>Electrical supply, cooling, compressed air, foundation, lifting access and environmental requirements are confirmed with your order \u2014 please ask us. The compact machine dimensions do not establish cleanroom suitability or specify the required surrounding service area.<\/p><p>Before the trial, agree on the thickness measurement method, edge condition, surface inspection and acceptable output. Record the material, mounting and operating conditions used so the result can be interpreted in context. Free sample cutting is available; sample logistics and the precise scope should be agreed with the team.<\/p><p>CE certified \u00b7 12-month warranty \u00b7 Response within 12 hours. These support terms do not replace the order-specific technical agreement or create a guaranteed cutting result.<\/p><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c09 e-con-full e-flex e-con e-parent\" data-id=\"i600c09\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w09 elementor-widget elementor-widget-html\" data-id=\"i600w09\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section id=\"faq\"><div class=\"wrap\"><h2>Questions before selecting the machine<\/h2><details><summary>Is 0.3 mm the finished wafer thickness?<\/summary><p>No. It is the lower end of the listed slice range. The required as-cut thickness must account for downstream finishing and the agreed acceptance criteria.<\/p><\/details><details><summary>Does 2,200 m\/min mean the maximum production rate?<\/summary><p>No. It is maximum wire travel speed. Feed, blank dimensions, material, handling and inspection all affect accepted production output.<\/p><\/details><details><summary>Can the same settings be used for different materials?<\/summary><p>That should not be assumed. Material grade, workpiece support, wire setup and target result must be reviewed for the actual cut.<\/p><\/details><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-i600c10 e-con-full e-flex e-con e-parent\" data-id=\"i600c10\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-i600w10 elementor-widget elementor-widget-html\" data-id=\"i600w10\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"scp somi600-product\"><section class=\"cta\" id=\"trial\"><div class=\"wrap grid2\"><div><span class=\"kicker\" style=\"color:#b9d8cb\">Free sample cutting<\/span><h2>Send your blank dimensions and target slice requirements<\/h2><p>Share the material grade, drawing and inspection limits so the team can review SOMI2-600S against the actual cutting task.<\/p><a class=\"btn\" href=\"https:\/\/www.semiconductorcutting.com\/cut-equipment-manufacturer\/\">Request free sample cutting<\/a><p class=\"trust\">CE certified \u00b7 12-month warranty \u00b7 12-hour response \u00b7 Free sample cutting<\/p><\/div><div><ul class=\"list\"><li>Material grade and orientation<\/li><li>Blank and fixture dimensions<\/li><li>As-cut thickness and finishing allowance<\/li><li>Batch size and acceptance criteria<\/li><\/ul><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>2\ucd95 \ub2e8\uc77c \uc6cc\ud06c\uc2a4\ud14c\uc774\uc158 \uc778\ubc84\ud2f0\ub4dc \uc808\ub2e8. 660 \u00d7 160 \u00d7 150 mm \ube14\ub7ad\ud06c \uc6a9\ub7c9, 0.3\u20133 mm \uc2ac\ub77c\uc774\uc2a4 \ubc94\uc704 \ubc0f \ucd5c\ub300 2,200 m\/min \uc655\ubcf5 \uc640\uc774\uc5b4 \uc18d\ub3c4.<\/p>","protected":false},"featured_media":4946,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"_acf_changed":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"page-builder","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[789,242],"product_tag":[827],"class_list":["post-4917","product","type-product","status-publish","has-post-thumbnail","product_cat-multi-wire-saw-machines","product_cat-products","product_tag-600s-multi-wire-saw-ultra-thin-silicon-wafer-ultra-thin-silicon-wafers-ultra-thin-wafer-slicing-wire-saw-wafer-slicing","desktop-align-left","tablet-align-left","mobile-align-left","ast-product-gallery-layout-horizontal-slider","ast-product-gallery-with-no-image","first","instock","shipping-taxable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product\/4917","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/comments?post=4917"}],"version-history":[{"count":15,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product\/4917\/revisions"}],"predecessor-version":[{"id":6121,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product\/4917\/revisions\/6121"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/media\/4946"}],"wp:attachment":[{"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/media?parent=4917"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product_brand?post=4917"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product_cat?post=4917"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/ko\/wp-json\/wp\/v2\/product_tag?post=4917"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}