{"id":5611,"date":"2026-07-11T01:30:56","date_gmt":"2026-07-10T17:30:56","guid":{"rendered":"https:\/\/www.semiconductorcutting.com\/?p=5611"},"modified":"2026-07-11T01:31:00","modified_gmt":"2026-07-10T17:31:00","slug":"best-4-axis-diamond-wire-cutting-machine","status":"publish","type":"post","link":"https:\/\/www.semiconductorcutting.com\/fr\/best-4-axis-diamond-wire-cutting-machine\/","title":{"rendered":"Quelle alimentation convient le mieux aux besoins d'une machine de d\u00e9coupe diamant\u00e9e \u00e0 fil 4 axes ? Tension, phase, disjoncteur"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Have you ever plugged in a CNC diamond wire cutter when the breaker tripped? I\u2019ve seen this a number of times. I have more than 7 years of experience in the cutting business. In this article, I will inform you about the power needed for the best 4 axis diamond wire cutting machine.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I will discuss voltage, phase, breaker size, and wire tips. At the end of this you\u2019ll learn how to properly power setup.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What is the Best 4 Axis Diamond Wire Cutting Machine, and Why Does Power Matter?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Sapphire, silicon carbide, and advanced ceramics may all be cut using the <strong><a href=\"https:\/\/www.semiconductorcutting.com\/fr\/categorie-de-produits\/produits\/single-wire-saw-machines\/\" target=\"_blank\" rel=\"noreferrer noopener\">meilleure machine de d\u00e9coupe fil diamant 4 axes<\/a><\/strong>. It employs a rapid moving wire with a diamond coating and very little material is wasted. It has 4 axis &#8211; X, Y, Z and an axis for tilt or rotation.\u00a0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This enables compound-angle cutting and 3D semiconductor profile cutting. It operates servo motors, tension systems, wire guides and cooling pumps at the same time. Wrong power might break the cable or harm the controller. strong performance depends on strong power.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1024\" height=\"1024\" src=\"https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1.png\" alt=\"meilleure machine de d\u00e9coupe fil diamant 4 axes\" class=\"wp-image-5612\" style=\"width:460px\" srcset=\"https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1.png 1024w, https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1-300x300.png 300w, https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1-150x150.png 150w, https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1-768x768.png 768w, https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1-12x12.png 12w, https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1-600x600.png 600w, https:\/\/www.semiconductorcutting.com\/wp-content\/uploads\/2026\/07\/image-1-100x100.png 100w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>4-Axis Diamond Wire Machine: Power Requirements at a Glance<\/strong><\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Power Component<\/strong><\/td><td><strong>Typical Requirement<\/strong><\/td><td><strong>Pourquoi c'est important<\/strong><\/td><\/tr><tr><td>Voltage (Single Phase)<\/td><td>110V or 220V AC<\/td><td>Powers light-duty and lab machines<\/td><\/tr><tr><td>Voltage (Three Phase)<\/td><td>380V \/ 400V \/ 440V AC<\/td><td>Needed for industrial servo systems<\/td><\/tr><tr><td>Phase Type<\/td><td>Single or Three Phase<\/td><td>Affects motor torque and stability<\/td><\/tr><tr><td>Breaker Size<\/td><td>20A to 63A<\/td><td>Protects wiring and machine parts<\/td><\/tr><tr><td>Frequency<\/td><td>50Hz or 60Hz<\/td><td>Must match your region and machine<\/td><\/tr><tr><td>Grounding<\/td><td>Required (earth ground)<\/td><td>Stops electric shock and signal noise<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What voltage does a 4-axis diamond wire saw need to run safely?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before installing a <strong><a href=\"https:\/\/www.semiconductorcutting.com\/fr\/4-axis-diamond-wire-cutting-machine-for-sale\/\" target=\"_blank\" rel=\"noreferrer noopener\">High-Precision Diamond Wire Saw<\/a><\/strong>, you should verify the voltage. Get it incorrectly and you might do some real harm. Small lab equipment operate on single phase 220V AC. But industry&#8217;s machines need more. Sapphire cutting machines, also known as tilting rotary wire cutting machines, need 3-phase 380V or 440V AC power.\u00a0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Wrong voltage will burn out servo drives and create wire tension instability. Always refer to the machine nameplate and match your supply voltage accurately.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Single-Phase vs Three-Phase: Which One Do You Need?<\/strong><\/h3>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>Single-Phase Power<\/strong><\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Suitable for tiny lab diamond wire saws, desktop saws<\/li>\n\n\n\n<li>Standard in 110V (US) 220V (EU\/Asia) areas<\/li>\n\n\n\n<li>Lower starting torque, not good for heavy wire tension<\/li>\n\n\n\n<li>Simple home or business wiring for easy installation<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>Three-Phase Power<\/strong><\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li>CNC Diamond Wire Cutter Systems<\/li>\n\n\n\n<li>Supplies balanced power to all servo axes simultaneously<\/li>\n\n\n\n<li>Supports higher loads without voltage drop<\/li>\n\n\n\n<li>Required for the most advanced ceramic cutting manufacturing equipment<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Single-Phase vs. Three-Phase: Quick Comparison<\/strong><\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Fonctionnalit\u00e9<\/strong><\/td><td><strong>Single Phase<\/strong><\/td><td><strong>Three Phase<\/strong><\/td><\/tr><tr><td>Common Voltage<\/td><td>220V<\/td><td>380V \/ 440V<\/td><\/tr><tr><td>Motor Torque<\/td><td>Plus faible<\/td><td>Plus haut<\/td><\/tr><tr><td>Id\u00e9al pour<\/td><td>Lab \/ R&amp;D<\/td><td>Production \/ Industrial<\/td><\/tr><tr><td>Install Cost<\/td><td>Faible<\/td><td>Moderate to High<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>How to Check Your Facility Voltage Before You Install<\/strong><\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Check the main panel. Find out whether it has one phase neutral wire or three phase hot wires<\/li>\n\n\n\n<li>Use a digital multimeter.\u00a0 Measure the voltage hot to neutral for single-phase. Measure hot-to-hot for three-phase<\/li>\n\n\n\n<li>Have your electrician check the kind of phase and the available amperage.<\/li>\n\n\n\n<li>Check the power spec sheet for your equipment and compare.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What breaker size is recommended for the best 4 axis diamond wire cutting machine?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Selecting the correct size breaker is extremely crucial. If the breaker is too tiny the machine will trip it when it starts up. If the breaker is too big it will not safeguard your wire. Most of the <strong><a href=\"https:\/\/www.semiconductorcutting.com\/fr\/4-axis-diamond-wire-cutting-machine\/\" target=\"_blank\" rel=\"noreferrer noopener\">best 4 axis diamond wire cutting machines<\/a><\/strong> have a breaker size of 20A to 63A.\u00a0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The basic guideline is this: Use a breaker rated at 125% of the full load amps of the machine. This allows the starting current. It also prevents nuisance excursions.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Breaker Sizing Guide by Machine Type<\/strong><\/h3>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>Light Duty \/ Lab Models<\/strong><\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Power draw: 1.5 kW to 3 kW<\/li>\n\n\n\n<li>Breaker: 20A single phase or 16A three phase<\/li>\n\n\n\n<li>Wire gauge: 2.5mm\u00b2 or 12 AWG minimum<\/li>\n\n\n\n<li>Good for: R&amp;D, small batch, 3D semiconductor profile cutting at low speeds<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>Mid-Range Industrial Models<\/strong><\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Power draw: 4 kW to 8 kW<\/li>\n\n\n\n<li>Breaker: 32A to 40A three phase<\/li>\n\n\n\n<li>Wire gauge: 4mm\u00b2 to 6mm\u00b2 minimum<\/li>\n\n\n\n<li>Good for: Sapphire cutting machine work, optics, and ceramics<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>Heavy Industrial Models<\/strong><\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Power draw: 10 kW to 20 kW<\/li>\n\n\n\n<li>Breaker: 50A to 63A three phase<\/li>\n\n\n\n<li>Wire gauge: 10mm\u00b2 or larger<\/li>\n\n\n\n<li>Good for: Multi-wire tilting rotary wire cutting systems and large parts<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Breaker &amp; Wire Gauge Guide by Machine Type<\/strong><\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Type de machine<\/strong><\/td><td><strong>Power Draw<\/strong><\/td><td><strong>Breaker Size<\/strong><\/td><td><strong>Wire Gauge<\/strong><\/td><\/tr><tr><td>Lab \/ Light Duty<\/td><td>1.5\u20133 kW<\/td><td>20A (1-phase)<\/td><td>12 AWG \/ 2.5mm\u00b2<\/td><\/tr><tr><td>Mid Industrial<\/td><td>4\u20138 kW<\/td><td>32\u201340A (3-phase)<\/td><td>10 AWG \/ 4mm\u00b2<\/td><\/tr><tr><td>Heavy Industrial<\/td><td>10\u201320 kW<\/td><td>50\u201363A (3-phase)<\/td><td>6 AWG \/ 10mm\u00b2<\/td><\/tr><tr><td>Custom Multi-Wire<\/td><td>20 kW+<\/td><td>80\u2013100A (3-phase)<\/td><td>4 AWG \/ 16mm\u00b2<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How Does Bad Power Hurt Cut Quality on a Diamond Wire Saw?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Bad electricity does more than just trip breakers. It also screws up your cuts. Voltage dips cause the strain in the wire spike and wander. This leads to wire breakage and a poor surface finish.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Even a 5% voltage decrease may induce cracking on machines that cut ultra-hard materials like GaN wafers or silicon carbide. Uneven servo response is caused by unstable three phase power. This makes it difficult to keep compound-angle cutting in tolerance.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Real Problems That Come From Wrong Power<\/strong><\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Wire breaks mid-cut &#8211; servo voltage drops under heavy load<\/li>\n\n\n\n<li>Wavy cut surface &#8211; power noise enters the motion controller<\/li>\n\n\n\n<li>Voltage spikes from filthy supply Controller failures and E-stops<\/li>\n\n\n\n<li>Axis drift in 4 axis motion &#8211; phase imbalance in 3 phase systems<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Easy Fixes for Common Power Problems<\/strong><\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Probl\u00e8me<\/strong><\/td><td><strong>Cause<\/strong><\/td><td><strong>Fix<\/strong><\/td><\/tr><tr><td>Frequent wire breaks<\/td><td>Voltage sag under load<\/td><td>Upgrade to proper three-phase feed<\/td><\/tr><tr><td>Wavy surface finish<\/td><td>Power line noise<\/td><td>Add a line filter or UPS<\/td><\/tr><tr><td>Controller fault codes<\/td><td>Voltage spike<\/td><td>Install a surge protector<\/td><\/tr><tr><td>Axis drift in 4th axis<\/td><td>Phase imbalance<\/td><td>Check phase balance at the panel<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What are the best power setup tips for the best 4 axis diamond wire cutting machine?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Good power setup from day one saves you time &amp; money. Wrong set up might mess up your computer quickly. It may also produce terrible cuts and safety issues. Here are the main procedures to take before powering up the <strong><a href=\"https:\/\/www.semiconductorcutting.com\/fr\/produit\/svi-80-80-scie-a-fil-en-graphite-6\/\" target=\"_blank\" rel=\"noreferrer noopener\">meilleure machine de d\u00e9coupe fil diamant 4 axes<\/a><\/strong>.\u00a0<\/p>\n\n\n\n<iframe width=\"1362\" height=\"1021\" src=\"https:\/\/www.youtube.com\/embed\/_4H779jbSU4\" title=\"SGRT20 Coupe en inclinant le produit - Scie \u00e0 fil unique diamant\u00e9e Vimfun\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n\n\n\n<p class=\"wp-block-paragraph\">These recommendations apply to tiny labs and large manufacturing lines. They also apply to any arrangement for advanced ceramic cutting. Follow them closely and you will prevent most frequent power difficulties.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Power Installation Checklist &#8211; Step by Step<\/strong><\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Check the machine nameplate to ensure you purchase the supply cable with the correct voltage and phase type<\/li>\n\n\n\n<li>Provide a dedicated circuit for the machine. Do not share with other heavy equipments<\/li>\n\n\n\n<li>Pick the proper wire gauge for your run length and amperage<\/li>\n\n\n\n<li>Install a good dirt ground. This protects the operator and the servo drives<\/li>\n\n\n\n<li>If your facility has unclean or unpredictable electricity add a line conditioner or UPS<\/li>\n\n\n\n<li>Clearly label all breakers and test before connecting the machine<\/li>\n\n\n\n<li>Have a licensed electrician check the installation before the first power-on<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Why a Dedicated Circuit Is Important for CNC Diamond Wire Cutter Systems<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Welders, air compressors, etc all share a circuit and generate voltage spikes. These surges might corrupt computer settings. They can also take out servo drives.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">They induce unpredictable E-stops during 3D semiconductor profile cutting runs. A dedicated circuit with solid grounding is the finest thing you can do for machine dependability.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Questions fr\u00e9quemment pos\u00e9es<\/strong><\/h2>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>What voltage does the best 4 axis diamond wire cutting machine use?<\/strong><\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Industrial versions most often utilise 3-phase AC at 380V or 440V. Lab models may utilise 220V single-phase. Always verify the nameplate on the machine. Using an incorrect voltage can harm the servo drives. It will also cancel your warranty. Points of Interest:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Industrial Machines: 3 phase 380V\/440V<\/li>\n\n\n\n<li>Lab machines: 220V single phase<\/li>\n\n\n\n<li>\u201cAlways check the machine nameplate first\u201d<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>What breaker size do I need for a diamond wire cutting machine?<\/strong><\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Use a breaker sized at 125% of the full load amps of the machine. Most mid-range CNC diamond wire cutter systems use a 32A-40A three phase breaker. Small lab units may only need 20A. Don&#8217;t make the breaker bigger than the load needs. It won&#8217;t safeguard your wiring. Highlights:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Light duty 20A single phase<\/li>\n\n\n\n<li>Industrial 32-40 Three Phase Mid<\/li>\n\n\n\n<li>Heavy industrial 50-63A, 3 phase<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>Can I run a 4 axis diamond wire saw on single-phase power?<\/strong><\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Yes, but only for modest R&amp;D or lab devices. Full industrial systems like sapphire cutting machines or advanced ceramic cutting need 3-phase electricity. Single phase does not have adequate torque for multi-axis manufacturing operations. Key takeaways:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Single-phase is for lab or light model only<\/li>\n\n\n\n<li>Three phase is essential for industrial purposes<\/li>\n\n\n\n<li>Torque and stability depend on the phase type<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\"><strong>What happens if my power supply is unstable?<\/strong><\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Unstable power results in wire breakage and axis drift. It also causes poor surface quality and controller failures. Even tiny voltage fluctuations may create problems for tasks such as tilting rotary wire cutting, or 3D semiconductor profile cutting. Best repair : line conditioner or UPS. Abstract:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Some frequent symptoms of poor power include wire breakage and drift.<\/li>\n\n\n\n<li>A line conditioner or UPS will address most problems<\/li>\n\n\n\n<li>Dedicated circuit may eliminate a lot of noise<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Conclusion<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For the best 4 axis diamond wire cutting machine, clean, reliable and suitably proportioned power is important. Voltage, phase, breaker size and wire gauge all have an impact on cut quality and machine life. Get things correctly and your machine will purr for years to come.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Choisissez <strong><a href=\"https:\/\/www.semiconductorcutting.com\/fr\/\" target=\"_blank\" rel=\"noreferrer noopener\">Vimfun<\/a><\/strong> for your CNC diamond wire cutter, with complete technical support. They provide a full portfolio of high-precision diamond wire saw systems with professional support from day one. Come to Vimfun now.<\/p>","protected":false},"excerpt":{"rendered":"<p>Have you ever plugged in a CNC diamond wire cutter when the breaker tripped? I\u2019ve seen this a number of times. I have more than 7 years of experience in the cutting business. In this article, I will inform you about the power needed for the best 4 axis diamond wire cutting machine. I will [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":4090,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[8],"tags":[749,1038,1039,718,673,720],"class_list":["post-5611","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news-insights","tag-3d-semiconductor-profile-cutting","tag-best-4-axis-diamond-wire-cutting-machine","tag-cut-ultra-hard-materials","tag-high-precision-diamond-wire-saw","tag-sapphire-cutting-machine","tag-tilting-rotary-wire-cutting"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/posts\/5611","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/comments?post=5611"}],"version-history":[{"count":1,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/posts\/5611\/revisions"}],"predecessor-version":[{"id":5613,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/posts\/5611\/revisions\/5613"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/media\/4090"}],"wp:attachment":[{"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/media?parent=5611"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/categories?post=5611"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.semiconductorcutting.com\/fr\/wp-json\/wp\/v2\/tags?post=5611"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}